Thermal Issues With Home Internet Gateway/Router as a Cause of Dropped/Slow Internet or Wi-Fi Connection

F
Userlevel 2
Badge

I am a Newbie here and a fairly new T-Mobile Home Internet customer. But my background is electrical engineering and I've been around a while. Like many community members I have experienced frustrating degradation of my internet connectivity after a period of operation, which is temporarily fixed by cycling the Gateway's power (otherwise known as a soft reset, not the paperclip nuclear option). The standard fix per T-Mobile Tech Support is to just perform that reset, which isn't a “fix” at all. Though many others have noted the thermal connection, I feel it’s time we get organized on this.

 

Without going into great detail and after surfing a number of forum threads and through my own direct experience, I have become convinced that the primary cause of the various complaints expressed by posters is heat buildup in the Gateway's enclosure and a subsequent compromise in performance in one or several of the Gateways numerous devices. There could be multiple devices affected, manifesting in different failure modes, but one primary cause – heat.

 

What I'm asking community members to do is to test this theory by keeping a record of the time from device reset (powering down, then back up) to failure or degradation of either internet or wi-fi connectivity or any other failure mode, and then to apply some means of enhanced airflow through the Gateway's enclosure, whether it be placing a muffin fan on top of the Gateway (blowing up, not down) or simply sitting the Gateway atop an A/C vent in your home with constant airflow and recording any difference in the time between reset and the failure. Repeating this sequence several times and then posting your results here, on this thread, will be most helpful.

 

If, as I strongly suspect will be the case, a correlation between enhanced airflow and increased “up-time” is documented in one place (here) by multiple forum members, we will have a powerful tool to get T-Mobile's management to fix this problem. Please don’t post here unless you have performed the requested action; there are many other threads to use.

 

What do you say?

FJ

34 replies

R
Userlevel 4
Badge +3

 

A USB fan will not plug into the back of the Sagemcon, it has to be a c end to plug in. 

 

Just buy an adapter from whatever type of USB plug your fan has to a USB-C plug. My fan has a USB-A plug on it, so I use a USB-A to USB-C adapter, and the fan works perfectly.

C
Badge

A USB fan will not plug into the back of the Sagemcon, it has to be a c end to plug in. 

G

Definitely a heat issue. More than a few times I was having issues with slow speeds. Couldnt even run a Google speed test or Jitter it was so slow. So went to the router (did not power it down) and turned on the fan and pointed it right at it and within 5 minutes my speeds go up. You can feel the outside. Its not hot hot but pretty warm. Once it cools down speed goes up. 

Tested this method time and time again. Its like “hey my internet is slow. Oh yeah I forgot to turn the fan on.” 

Hope this helps. 

S
 

To above:

 

100% a thermal issue... After sticking a 80mm fan on the side the issues are gone..  Went through 3 routers all having the overheating issue..  And losing signal/having to soft reset after only a few hours of use. They could have charged another $10, put a fan in there and saved 98% of their customers headaches..  Ever since cooling it down it's been a beast. Im rural and this is by far the best internet option for me. And it's not terrible with gaming as long as the signal is good and router is cool. 

 

What do you say?

 

D

I can say without a doubt this is an overheating issue. The first gateway lasted 8 months without any issues and only 2 bars. D/L speeds of over 50 most of the time close to 100. Once the issues started the gateway would reboot every 5 to 10 minutes during heavy throughput, 4 to 5 devices connected. When I lost connections, I would walk over to the gateway and it was powering back up every time. This went on for several days until I got it replaced with my second gateway. Within a few days the same problem started and I put a fan on it and the problem went away. Took the fan off and problem came back. I’m now on my 3rd trash can and have not seen any issues yet. I do not have the time nor am I going to do what T-Mobile should have already done, collect the stats to confirm the issue and rectify it.    

R

I’ve done the reset reboot and everything then found what works , I have my gray tmobile 5 g on its side with a holmes small air purifier on high blowing air into the top side of it , and it has worked for over a month like this , it has fixed the thermal issue . Engineers should have put fans into the modem!

D

I bought usb fans for my overheating issue. And the gateway still self reboots all the time. In fact, the majority of the time, I use cellular in my home, and not through the gateway. 
 

when it DOES work, I get crap speeds I’m literally at a loss of what to do. The only other internet option where I am is Spectrum and I left them in October for TMobile  suggestions? Because T-Mobile customer service isn’t helpful at all  

 

B

I've been having issues for 4 weeks and support blamed towers that were being worked on and then just kept saythey were investigating the issue, being super nice, but never offering a solution. 

I felt for heat and felt a little but didn't think it was bad, I decided to try a laptop cooling fan anyway and within around 10 minutes everything came back blazing fast.  It's stayed so far longer than it has in 4 weeks.  

 

I decided I'd search to see if anyone else agreed about the overheating and I found your post.  I think you are definitely right and it irritates me badly that they know about this and never say a word!

My TV is over the internet and it has been awful.  Thank you for sharing your findings  

S
Badge

I have now not had a loss of internet since June 10th.  The fan solved the problem so far.  
 

The 5G cylinder sits in the exact same place as it did during the many May failures.  It is just raised about 1 inch by sitting it on top of the USB fan. I made no other changes to the setup, not even rotating the 5g cylinder.  
 

I went from seemingly random failures to none.
 

I recently added t-mobile’s YouTube TV offer and no problems.   I was concerned it wouldn’t show local channels with the home internet jumping around, but the location is determined by your cellphone. Very pleased so far.  

I now have gone over two months without a reset since adding the fan below the unit.  Plus my usage has gone up as we now have YouTube TV in use regularly.  I get 80 to 120 down and 20 to 50 uploads.  One thing I forgot to report is that I have the WiFi turned off.  I go out the Ethernet port to an eero mesh system to supply WiFi coverage in my house. 
 

It is obvious to me there is a heat problem at a minimum in the design of the 5g cylinder.  

I have now passed FOUR months with the fan running, as I discussed months ago, and have not had a single internet dropping out failure.  It is obvious to me there is a heat problem with the 5g cylinder.  

S

I removed the battery and don’t have heat issues any longer.  Battery serves no useful purpose in my opinion, it only causes problems.  I also plug it into a digital timer and turn it off for 5 minutes a 3am and then back on.  This cleans out the short term memory (cache) and keeps it running more smoothly. 

B
Badge

tlepird,

Thanks for posting. Call me a conspiracy theorist, but the fact that it seems many of the tech support reps won't admit overheating issues with the Nokia equipment makes me also wonder if T Mobile management is instructing them to claim ignorance about it. Sad to hear you're having problems with no less than three gateways, and that you've found it necessary to buy a fan, to go through the hassle of setting up and configuring your old router to work with the gateway after disabling the built-in wifi, and to take time to ship back two exchange gateways,  just to get the internet service you were assured would be provided.

I know this is not really a solution, and at best a workaround, but especially if you already shelled out for a cooling fan, I found placing it on top of the gateway provides better airflow, since when placed underneath a greater amount of the stream likely is diverted through the gaps at the base of the gateway. Sure, the LCD display is covered, but it's easy enough to lift up when you want to view it.

T

The new T-Mobile Gateway has sever over heating problems caused by the WiFi system. The more devices hooked to the WiFi 6 system the more heat that is generated. If you disable all the WiFi on the router, and use an external router to provide WiFi the heat will go down and the router will return to normal operation.  I am on my third router and they all seem to have the same problem. When they over heat, they break contact with the tower losing the Internet until the heat goes down then the connection is restored and then the  Internet comes back. This cycling happened over and over with every router I tried when ever I used the internal WiFi6 connection.  I have been working with this router for the past 4 months and discussed the problem with their tech support people on numerous occasions. They are either clueless about the heating issue or, as I suspect, they are being told not to acknowledge the problem to customers. Tech support proposed all kinds of probable solutions to my problems including replacement units but never once suggested the overheating problem caused by the WiFi system and that I should stop using it.

In an effort to reduce the over heating, I sat the router onto of an electronic cooling fan that blew a gentle stream of air up the router and out the top, but for some reason it made the router break the connection with the tower losing the Internet faster. Apparently, what ever is sensitive to the heat is located in the top of the router and blowing heated air up through the tower only causes it to trip out quicker.  I have been using my old Netgear Nighthawk router for several days now to supply WiFi for all my wireless devices and have not suffered a loss of connection with my tower and no loss of the Internet.

This problem has been documented by a number of people on the Internet and Facebook and many of them have employed the same solution to the overheating problem.  With the rate people in my neck of the woods are switching to the new T-Mobile Gateway system, I hope T-Mobile recognizes it and finds a fix before to many more of these defective routers get into the field. A lot of people are getting turned off by the bad performance and heating problems and are looking to other methods to getting their Internet service.

B
Badge

Fajohn,  Thanks for your post, and all of those posting replies to this thread! Although my Nokia gateway always felt a little warm, at first I thought it was just operating normally within manufacturer specs and to be expected, especially when running a few devices over WiFi. However, even though my unit is not in a hot area, is out of sunlight, and has good space around it for air flow, I was also getting repeated dropped WiFi connections, despite always stable and consistently fast Ethernet throughput. Since adding an external USB powered cooling fan (mine is 120 mm in diameter, sits on top, and connects directly to the gateway via a USB A female/C male adapter) immediately eliminated the problem and with no interruptions 10 days so far, I'm also convinced this is likely an overheating issue. If this is accurate, it definitely represents an oversight by T-Mobile, who is either shipping faulty units or providing hardware with significant design flaws. What especially troubles me is that during my three contacts with tech support, none of the reps acknowledged overheating even to be a possibility for impaired WiFi connectivity, let alone a known issue.

R
Userlevel 2
Badge

As another datapoint, I received my gateway in early September. So far it has worked better than what I had expected, albeit not supporting uPNP (PLEX), no help from the UPS port, and no idea about the mesh functionality requirements. I am also an EE PCB designer. I’m using a 12VDC battery backup UPS designed for 12VDC telecom equipment to power the gateway (as the internal battery is configured to drop WiFi when power is lost) for my ring doorbells.  Wish I was in the 5G Ultra area but I’m in the extended area. Speed tests are generally around 150Mbps down, 40-60Mbps up. LOTS of packet loss when I first turned this on and tried, but after 30 mins, re-trying I still see 0.0% from speedtest.net site. From 192.168.12.1:

  • hardware version = 3TG00739AABB
  • software version = 1.2101.00.1609
  • “Running Time” = 3d 20h 56m (as of 2:22PM EST)
  • Cellular “Data Sent” 6.03 GB  “Data Received” 76.60 GB (Wifi is significantly more - NAS)
  • Location: 2nd floor in a closet on top shelf, in a conditioned house
  • No fans, no metal objects within 3 feet.
  • Nothing loose (BTW the heat sinks should be retained to PCB via wire, otherwise they could short internal components and perhaps cause a fire (very unlikely but not impossible).

 

B
Userlevel 2
Badge +1

I used my hand held temperature and pointed it to my gateway.  It read “HIGH” I bought this fan and set it to medium.  Its very silent. I found this on Reddit.

https://www.amazon.com/dp/B00G059G86?psc=1&ref=ppx_yo2_dt_b_product_details

 

When I point my Temperature back at the Tower it now says 90 degrees.  You can plug the USB right in to the back of the router tower  or put a little brick on the end.

 

It really makes a difference.  This fan is a very high quality/build device.  I’m very happy with it.

iTinkeralot
Rank
Userlevel 7
Badge +8

If T-Mobile support engineers consistently requested specific information about the routers and recorded it so they could establish a thorough profile of the population of routers where customers are reporting behavior that appears to be heat related they might just identify a batch run of routers that have a specific related fault or a common out of spec component that results in the behavior. The need for a reboot seems more related to memory corruption or a buffer issue. If the issue “is” heat related I would be inclined to believe a cool down period would be required to improve behavior for any amount of time. The T-Mobile engineers need to gather the data, provide it to engineering, and focus on resolution not temporary workarounds that do not resolve the issue. With remote access to the routers the T-Mobile engineers should be able to gather data to build a clear profile of the routers involved. 

I
Userlevel 2
Badge +1

Yes, I don’t think a fan is necessary unless you have the gateway in a windowsill in the sun or something like that. People think heat emanating from the top is bad but actually that’s a sign that the big heatsync inside is doing it’s job and moving the heat out from the internals. 

iTinkeralot
Rank
Userlevel 7
Badge +8

There may be a heat related issue with “some” of the routers. I have had mine since early January 2020 and I really cannot say with any certainty that it has had any heat related problem. I do believe there may be some of the routers that are from a given manufacturing run that for some reason are more prone to over heating. It could be some component(s) out spec. These probably should have had some sort of fan included in the unit but I see no evidence of one. There are two fair sized heat sinks but still that might not be sufficient. I put a small fan under mine a week or so ago but I can’t say it makes any difference. I am more inclined to believe the majority of the disruptions I have had are related to maintenance work on the tower where the 5G signal is broadcasted. From all indications the primary signal comes from the tower north of here and the 4G LTE signal comes from another tower off to the NW at 270 degrees. When the 5G, secondary signal, falls and the router has to use the 4G LTE alone the router always experiences a period of disruption. These stationary routers should not be treated as phones are with respect to signal delivery it seems. They don’t appear to handle channel transitions very well. When both the 4G LTE and 5G signals are present it works pretty well. The 4G LTE delivery is just meh… to blah

S
Badge

I have now not had a loss of internet since June 10th.  The fan solved the problem so far.  
 

The 5G cylinder sits in the exact same place as it did during the many May failures.  It is just raised about 1 inch by sitting it on top of the USB fan. I made no other changes to the setup, not even rotating the 5g cylinder.  
 

I went from seemingly random failures to none.
 

I recently added t-mobile’s YouTube TV offer and no problems.   I was concerned it wouldn’t show local channels with the home internet jumping around, but the location is determined by your cellphone. Very pleased so far.  

I now have gone over two months without a reset since adding the fan below the unit.  Plus my usage has gone up as we now have YouTube TV in use regularly.  I get 80 to 120 down and 20 to 50 uploads.  One thing I forgot to report is that I have the WiFi turned off.  I go out the Ethernet port to an eero mesh system to supply WiFi coverage in my house. 
 

It is obvious to me there is a heat problem at a minimum in the design of the 5g cylinder.  

iTinkeralot
Rank
Userlevel 7
Badge +8

Just an observation I have made regarding the drops. I can see service here tends to be delivered from two different towers. The tower at 5.3 miles 360 degrees, North, is where the secondary channel is delivered. The 4G LTE “primary” signal appears to be delivered from a tower 270 degrees, NW roughly 2.5 miles away. When the 5G secondary channel drops this becomes clear as traffic appears to be interrupted and of course the routing tends to be slow to recover and of course more latency and slower traffic. It is rather difficult to locate a router where the primary and secondary signals originate from two different locations and have reliable results. It appears to me most of the signal disconnects I have seen have been related to the loss of the secondary 5G channel and I am pretty sure this is mostly due to T-Mobile doing work on the tower equipment. It does make it difficult to know when T-Mobile is not transparent about service work and service delivery. The system may be designed to do traffic hand off but the process does not appear to be seamless. 

iTinkeralot
Rank
Userlevel 7
Badge +8

Thank you for the response. I was just thinking out loud and sharing. Right ambient temperature can be a factor. It would be helpful if T-Mobile support was more proactive and asked such questions OR better yet would leverage the software to automate the collection of key data points and use a template of questions to better profile customer problems. Hopefully T-Mobile will be able to improve their 5G deployments for more consistent service.

scottjd

I have not seen a single user report the actual hardware version. This may be an important factor in the equation. The HTML reporting will show the hardware version. I know mine is 3TG00739AAAA and I do not see heat related issues. Is it important? I cannot say for sure but it is a data point that should be considered and posted. I agree with Farjohn 100% the more facts people report in the thread the better the profile of the facts.

The point made about using the power button is an excellent point. If the router is unplugged and the power switch is still on then it stands to reason the battery can still provide power to the LTE and 5G radios but NOT the WIFI radios.

Has anyone with heat issues looked into the top of the can with a flashlight and examined the heat sinks? I recall seeing two in opposition to one another while working with my router. Heat sinks can fall off when the adhesive is not applied properly so look at the heat sinks. If they are not secure the chips are not getting proper heat transfer away. Shake the can and see if it rattles. If it rattles there may be a heat sink that has fallen off the board. In manufacturing there can be equipment runs that are made with materials that are not to spec and this can lead to batch failures. The layout is sort of bilateral with the antennas in a radial pattern around the outside of the internal board. There are (4) WIFI and (4) 5G alternating about the inside of the router. It is common that serial numbers have details for model and other aspects of the appliance in addition to its individual part. If T-Mobile were to provide information on the part(s) of the serial numbers that could be relevant to expose a serial run of components it might be a problem due to components or heat sink glue that is not to spec for a build run that can clarify why some people have head related issues. Adding a fan is a work around. Identification of the root cause is what needs to happen. Data. Not what we think but what is KNOWN. As many facts as possible.

  • hardware version
  • software version
  • serial number of units, (sequential pattern could indicate bad manufacturing run)
  • heat sinks secure/present
  • fan used or not (air transport bottom up)
  • environmental factors (warm, cool, sunny, shade etc…
  • number of wired and/or wireless devices recorded on the Overview page
  • details recorded (bullet the facts) make things obvious and quick to consume
  • alarms reported on the LED panel in the top of the can (yes/no)
  • indication of periodic element or total random
  • Report the upload and download of cell data and primary/secondary channels
  • record the “Running Time” if possible with issues present from the HTML page (192.168.12.1)
  • Record the “Data Sent” & “Data Received” values from the Status/WIFI reporting (this may help relate the traffic loading over the uptime period) 
  • SHARE this collection of data points with T-Mobile support engineers
  • Add any other data points, facts that you feel may be important
  • Discuss common factors in the thread with others


Great list, I think the only other thing I would add is ambient temperature. You do mention environmental factors (warm, cool, sunny, shade etc…) that can be helpful say if its in front of a window or not. Then again my windows don't shot much of a change in temp with the double glass UV prevention coatings.
So if your in a climate controlled environment the ambient temp may also play a part in this troubleshooting.

Thank you, Scott
iTinkeralot
Rank
Userlevel 7
Badge +8

Thank you Farjohn for reminding me of all the obvious things I know from working with enterprise trouble shooting for 22 years. The facts shared and reported for others and for T-Mobile support will help lead to finding the root cause. If they see the pattern they can take the gear, pull it apart and put them in heat chambers to confirm with testing that the components behave according to spec or not. I am sure if the hard facts get back to the Nokia engineers they can identify the problem and fix it.

iTinkeralot
Rank
Userlevel 7
Badge +8

I have not seen a single user report the actual hardware version. This may be an important factor in the equation. The HTML reporting will show the hardware version. I know mine is 3TG00739AAAA and I do not see heat related issues. Is it important? I cannot say for sure but it is a data point that should be considered and posted. I agree with Farjohn 100% the more facts people report in the thread the better the profile of the facts.

The point made about using the power button is an excellent point. If the router is unplugged and the power switch is still on then it stands to reason the battery can still provide power to the LTE and 5G radios but NOT the WIFI radios.

Has anyone with heat issues looked into the top of the can with a flashlight and examined the heat sinks? I recall seeing two in opposition to one another while working with my router. Heat sinks can fall off when the adhesive is not applied properly so look at the heat sinks. If they are not secure the chips are not getting proper heat transfer away. Shake the can and see if it rattles. If it rattles there may be a heat sink that has fallen off the board. In manufacturing there can be equipment runs that are made with materials that are not to spec and this can lead to batch failures. The layout is sort of bilateral with the antennas in a radial pattern around the outside of the internal board. There are (4) WIFI and (4) 5G alternating about the inside of the router. It is common that serial numbers have details for model and other aspects of the appliance in addition to its individual part. If T-Mobile were to provide information on the part(s) of the serial numbers that could be relevant to expose a serial run of components it might be a problem due to components or heat sink glue that is not to spec for a build run that can clarify why some people have head related issues. Adding a fan is a work around. Identification of the root cause is what needs to happen. Data. Not what we think but what is KNOWN. As many facts as possible.

  • hardware version
  • software version
  • serial number of units, (sequential pattern could indicate bad manufacturing run)
  • heat sinks secure/present
  • fan used or not (air transport bottom up)
  • environmental factors (warm, cool, sunny, shade etc…
  • number of wired and/or wireless devices recorded on the Overview page
  • details recorded (bullet the facts) make things obvious and quick to consume
  • alarms reported on the LED panel in the top of the can (yes/no)
  • indication of periodic element or total random
  • Report the upload and download of cell data and primary/secondary channels
  • record the “Running Time” if possible with issues present from the HTML page (192.168.12.1)
  • Record the “Data Sent” & “Data Received” values from the Status/WIFI reporting (this may help relate the traffic loading over the uptime period) 
  • SHARE this collection of data points with T-Mobile support engineers
  • Add any other data points, facts that you feel may be important
  • Discuss common factors in the thread with others
S
Badge

I have now not had a loss of internet since June 10th.  The fan solved the problem so far.  
 

The 5G cylinder sits in the exact same place as it did during the many May failures.  It is just raised about 1 inch by sitting it on top of the USB fan. I made no other changes to the setup, not even rotating the 5g cylinder.  
 

I went from seemingly random failures to none.
 

I recently added t-mobile’s YouTube TV offer and no problems.   I was concerned it wouldn’t show local channels with the home internet jumping around, but the location is determined by your cellphone. Very pleased so far.  

Reply


New badge winners

Show all badges
Terms & Conditions