Anyone have a solution to the " pres the was button" issue. I can get my printer to see the access point but it won't connect and I am never presented an option to enter my pw.
Best answer by nc1037
View originalAnyone have a solution to the " pres the was button" issue. I can get my printer to see the access point but it won't connect and I am never presented an option to enter my pw.
Best answer by nc1037
View originalYou will need to do Standard setup (from the Canon manual)
There is no WPS button on the T-Mobile Gateway, so you’ll need to enter the network password with the printer’s control panel.
If you haven’t already done so, create a second network, 2.4GHz with security reduced to WPA/WPA2.
Leave the default netwrok alone and ADD a second network with the + sign at the bottom of the Network tab in the T-Mobile Internet app. For this new network, set the band to 2.4 GHz and set the WPA version to WPA/WPA2. Try connecting your printer to this second network. Use the default network for your other devices, as much as possible.
Here are the T-Mobile support instructions for how to add the second network with the app.
Android How to create additional Wi-Fi networks | T-Mobile Internet app | Android | T-Mobile Support
iOS How to create additional Wi-Fi networks | T-Mobile Internet app | iOS | T-Mobile Support
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.